Safety Guidelines for Home Pools
Swimming
pools should always be happy
places.Unfortunately, each year
thousands of American families confront
swimming pool tragedies, drowning's and
near-drowning's of young children. These
tragedies are preventable. These are
guidelines for pool barriers that can
help prevent most submersion incidents
involving young children. This designed
for use by owners, purchasers, and
builders of residential pools, spas, and
hot tubs. These guidelines are not
intended as the sole method to minimize
pool drowning of young children, just
helpful safety tips for safer pools.

Each year, hundreds of young children die
and thousands come close to death due to
submersion in residential swimming pools.
CPSC has estimated that each year about 300
children under 5 years old drown in swimming
pools. Hospital emergency room treatment is
required for more than 2,000 children under
5 years of age who were submerged in
residential pools. CPSC did an extensive
study of swimming pool accidents, both fatal
drowning's and near-fatal submersions, in
California, Arizona and Florida, states in
which home swimming pools are very popular
and in use during much of the year.
- In
California, Arizona and Florida,
drowning was the leading cause of
accidental
death in and around the home for
children under the age of 5
years.
- 75 percent of the
children involved in swimming pool
submersion or drowning accidents were
between 1 and 3 years old.
- Boys between 1 and 3
years old were the most likely victims
of fatal drowning's and near-fatal
submersions in residential swimming
pools.
- Most of the victims
were being supervised by one or both
parents when the swimming pool accident
occurred.
- Nearly half of the
child victims were last seen in the
house before the pool accident occurred.
In addition, 23 percent of the accident
victims were last seen on the porch or
patio, or in the yard.
- This means that fully
69 percent of the children who became
victims in swimming pool accidents were
not expected to be in or at the pool,
but were found drowned or submerged in
the water.
- 65 percent of the
accidents occurred in a pool owned by
the victim’s immediate family, and 33
percent of the accidents occurred in
pools owned by relatives or friends.
- Fewer than 2 percent
of the pool accidents were a result of
children trespassing on property where
they didn’t live or belong.
- 77 percent of the
swimming pool accident victims had been
missing for five minutes or less when
they were found in the pool drowned or
submerged.
The speed
with which swimming pool drowning's and
submersions can occur is a special concern:
by the time a child’s absence is noted, the
child may have drowned. Anyone who has cared
for a toddler knows how fast young children
can move. Toddlers are inquisitive and
impulsive and lack a realistic sense of
danger. These behaviors, coupled with a
child’s ability to move quickly and
unpredictably make swimming pools
particularly hazardous for households with
young children.
Swimming
pool drowning's of young
children have another
particularly insidious
feature: these are silent deaths.
It is unlikely
that splashing or screaming will
occur to alert a parent or
caregiver that a
child is in trouble.
The best way to reduce
child drowning's in residential
pools was
for pool owners to construct and
maintain
barriers that would prevent young
children from
gaining access to pools.
However, there are no substitutes
for diligent
supervision.
Why
the Swimming Pool Guidelines Were
Developed
Young child
can get
over a pool barrier if
the barrier is too low or
if the barrier has handholds or
footholds for a child to use
when climbing. The guidelines
recommend that the top of a pool barrier
be at least 48 inches above grade,
measured on the side of the barrier
which faces away from the swimming pool.
Eliminating handholds and footholds and
minimizing the size of openings in a
barrier’s construction.
For a solid barrier
no indentations or protrusions
should be present, other than
normal construction tolerances
and masonry joints. For a barrier
(fence) made up of horizontal and
vertical members if
the distance between the
tops of the horizontal members
is less than 45 inches, the
horizontal members should be
on the swimming pool side of
the fence. The spacing of the
vertical members should not
exceed 1-3/4 inches. This size
is based on the foot width of a
young child and is intended to
reduce the potential for a
child to gain a foothold. If
there are any decorative cutouts
in the fence, the space
within the cutouts should not
exceed 1-3/4 inches.
The
definition of pool includes spas and hot
tubs. The swimming pool barrier
guidelines therefore apply to these
structures as well as to conventional
swimming pools.
How to Prevent a
Child from
Getting OVER a Pool Barrier
A successful pool barrier
prevents a child from getting OVER,
UNDER, or THROUGH and
keeps the child from gaining
access to the pool except when
supervising adults are present.
The
Swimming Pool Barrier Guidelines
If the distance between
the tops of
the horizontal members
is more than 45 inches, the
horizontal members can be on
the side of the fence facing
away from the pool. The spacing
between vertical members
should not exceed 4 inches.
This size is based on the head
breadth and chest depth of a
young child and is intended to
prevent a child from passing
through an opening. Again, if
there are any decorative
cutouts in the fence, the space
within the cutouts should not
exceed 1-3/4 inches.

For a chain
link fence the mesh size should not exceed
1-1/4 inches square unless slats, fastened
at the top or bottom of the fence, are used
to reduce mesh openings to no more than
1-3/4 inches.
For a fence
made up of
diagonal members
(latticework)
the maximum opening in
the lattice should not exceed
1-3/4 inches.
Aboveground
pools should have barriers. The pool
structure itself serves as a barrier or a
barrier is mounted on top of the pool
structure. Then, there are two possible ways
to prevent young children from climbing up
into an aboveground pool. The steps or
ladder can be designed to be secured, locked
or removed to prevent access, or the steps
or ladder can be surrounded by a barrier
such as those described above. For any pool
barrier, the maximum clearance at the bottom
of the barrier should not exceed 4 inches
above grade, when the measurement is done on
the side of the barrier facing away from the
pool.
If an aboveground pool has a barrier on the
top of the pool, the maximum vertical
clearance between the top of the pool and
the bottom of the barrier should not exceed
4 inches. Preventing a child from getting
through a pool barrier can be done by
restricting the sizes of openings in a
barrier and by using self-closing and
self-latching gates.
To prevent a
young child
from getting through a fence
or other barrier, all openings
should be small enough so that
a 4-inch diameter sphere cannot
pass through. This size is
based on the head breadth and
chest depth of a young child.
Gates
There are two
kinds of gates which might be found on a
residential property. Both can play a part
in the design of a swimming pool barrier.
Pedestrian
Gates are the
gates people
walk through. Swimming pool
barriers should be equipped
with a gate or gates which
restrict access to the pool. A
locking device should be
included in the gate design.
Gates should open out from
the pool and should be self
closing and
self-latching. If a
gate is properly designed, even
if the gate is not completely
latched, a young child pushing
on the gate in order to enter
the pool area will at least close
the gate and may actually engage
the latch.
When the release mechanism
of the self-latching
device is less than 54 inches
from the bottom of the gate,
the release mechanism for the
gate should be at least 3 inches
below the top of the gate on
the side facing the pool.
Placing the release mechanism
at this height prevents a young
child from reaching over the
top of a gate and releasing the
latch.
Also, the gate and barrier
should have no opening
greater than 1/2 inch within
18 inches of the latch release
mechanism. This prevents a
young child from reaching
through the gate and releasing
the latch.
Other gates should be
equipped with self-latching devices. The
self-latching devices should be
installed as described for pedestrian
gates.
How
to Prevent a Child from Getting UNDER /
THROUGH a Pool Barrier
In many homes, doors open directly onto the
pool area or onto a patio which leads to the
pool. In such cases, the wall of the house
is an important part of the pool barrier,
and passage through any doors in the house
wall should be controlled by security
measures. The importance of controlling a
young child’s movement from house to pool is
demonstrated by the statistics obtained
during CPSC’s study of pool incidents in
California, Arizona and Florida. Almost half
(46 percent) of the children who became
victims of pool accidents were last seen in
the house just before they were found in the
pool.
All doors
which give
access to a swimming pool
should be equipped with an
audible alarm which sounds
when the door and/or screen
are opened. The alarm should
sound for 30 seconds or more
within 7 seconds after the
door is opened and should be
loud, at least
85 decibels,
when measured 10 feet away
from the alarm mechanism.
The alarm sound should be
distinct from other sounds in
the house, such as the telephone,
doorbell and smoke
alarm. The alarm should have
an automatic reset feature.
Because adults will want
to pass through house doors in
the pool barrier without setting
off the alarm, the alarm should
have a switch that allows
adults to temporarily deactivate
the alarm for up to 15
seconds. The deactivation
switch could be a touch pad
(keypad) or a manual switch,
and should be located at least
54 inches above the threshold
of the door covered by the
alarm. This height was selected
based on the reaching ability
of young children.
Power safety
covers can be installed on pools to serve as
security barriers. Power safety covers
should conform to the specifications in ASTM
F 1346-91. This standard specifies safety
performance requirements for pool covers to
protect young children from drowning.
Self-closing doors with self-latching
devices could also be used to safeguard
doors which give ready access to a swimming
pool.
Indoor Pools
When a pool is located
completely within a house, the
walls that surround the pool
should be equipped to serve as
pool safety barriers. Measures
recommended above where a
house wall serves as part of a
safety barrier also apply for all
the walls surrounding an
indoor pool.
Guidelines
An outdoor swimming pool,
including an
inground,
aboveground, or onground pool,
hot tub, or spa, should be
provided with a
barrier which complies with the
following:
1. The top of
the barrier should be at least 48 inches
above grade measured on the side of the
barrier which faces away from the swimming
pool. The maximum vertical clearance between
grade and the bottom of the barrier should
be 4 inches measured on the side of the
barrier which faces away from the swimming
pool. Where the top of the pool structure is
above grade, such as an aboveground pool,
the barrier may be at ground level, such as
the pool structure, or mounted on top of the
pool structure. Where the barrier is mounted
on top of the pool structure, the maximum
vertical clearance between the top of the
pool structure and the bottom of the barrier
should be 4 inches.
2. Openings
in the barrier should not
allow passage of a 4-inch
diameter
sphere.
3. Solid
barriers, which do not have openings, such
as a masonry or stone wall, should not
contain indentations or protrusions except
for normal construction tolerances and
tooled masonry joints.
4. Where
the barrier is composed of
horizontal
and vertical members and the
distance
between the tops of the horizontal
members is less than 45 inches, the
horizontal members should be located
on the swimming pool side of the
fence. Spacing between vertical
members should not exceed 1-3/4
inches in width. Where there are
decorative cutouts, spacing within
the cutouts should not exceed 1-3/4
inches in width.
5. Where the
barrier is composed of horizontal and
vertical members and the distance between
the tops of the horizontal members is 45
inches or more, spacing between vertical
members should not exceed 4 inches. Where
there are decorative cutouts, spacing within
the cutouts should not exceed 1-3/4 inches
in width.
6. Maximum
mesh size for chain link
fences should not exceed 1-3/4
inch square
unless the fence is provided with
slats fastened at the top or the
bottom which
reduce the openings to no more
than 1-3/4 inches.
7. Where the
barrier is composed of diagonal members,
such as a lattice fence, the maximum
opening formed by the diagonal members
should be no more than 1-3/4 inches.
8. Access gates to the
pool should be
equipped to accommodate a
locking device. Pedestrian access
gates should
open outward, away from the pool,
and should be self-closing and
have a self latching
device. Gates other than
pedestrian
access gates should have a self-latching
device. Where the release
mechanism of
the self-latching device is located less
than 54 inches from the bottom of
the gate.
- The release
mechanism should be located on the
pool side of the gate at
least 3 inches below the top
of the gate.
- The gate and
barrier should have no opening
greater than 1/2 inch within 18
inches of the release mechanism.
9. Where a
wall of a dwelling serves as part of the
barrier, one of the following should apply:
- All
doors with direct access to the pool
through that wall should be
equipped with
an alarm which produces an audible
warning when
the door and its screen, if present,
are opened. The alarm should
sound
continuously for a minimum of 30 seconds
within 7 seconds after the
door is opened. The alarm should
have a minimum
sound pressure rating of 85 dBA at
10 feet and the sound of the
alarm should
be distinctive from other household
sounds, such as smoke alarms,
telephones,
and door bells. The alarm should
automatically
reset under all conditions. The
alarm should be equipped with
manual means,
such as touchpads or switches, to
temporarily deactivate the alarm
for a single
opening of the door from either
direction.
Such deactivation should last for no
more than 15 seconds. The
deactivation
touch pads or switches should be located
at least 54
inches above the threshold of the
door.
- The pool should be
equipped with a power safety cover which
complies with ASTM F1346-91 listed
below.
- Other means of
protection, such as self-closing doors
with self-latching devices, are
acceptable so long as the degree of
protection afforded is not less than the
protection afforded by the above.
10. Where an
aboveground pool structure is used as a
barrier or where the barrier is mounted
on top of the pool structure, and the
means of access is a ladder or steps,
then:
- The
ladder to the pool or steps
should be capable of being
secured,
locked or removed to prevent access.
- The
ladder or steps should be surrounded
by a barrier. When the ladder
or steps are secured, locked,
or removed,
any opening created should
not allow the
passage of a 4-inch diameter
sphere.
These guidelines are
intended to provide a means of
protection against potential
drowning's and narrowing to children
under 5 years of age by restricting
access to residential swimming
pools, spas, and hot tubs.
Exemptions
A portable
spa with a safety cover which complies
with ASTM F1346-91 listed below should
be exempt from the guidelines presented
in this document. Swimming pools, hot
tubs, and non portable spas with safety
covers should not be exempt from the
provisions of this document.